By Emil Casciano, Chief Nuclear Officer
August 16, 2018
Recently, there have been repeated instances where temporary systems and components have been disturbed, resulting in a loss of cleanliness, damage to equipment and potentially serious injury.
The most recent occurrence was when persons unknown disconnected a 440v power cable without the knowledge of whether or not the system was de-energized. Had the unknown person disconnected the cable while it was energized, the person could have been seriously injured. Since the owner of the system was not involved and unknowing of the disconnection, the system was subsequently turned on for routine operations, causing the exposed connector to be energized, which posed a serious risk to personnel and equipment.
Handling, operation, installation or removal of temporary systems and components must be performed by the organization that installed the system, and they must be contacted if the system must be removed or rerouted. There have been instances where removal of temporary systems or components without the knowledge of the owning trade has caused damage to finished work, and in the most recent case, risked serious personal injury. In those instances, the individual disconnecting the system did not ask the following three questions before proceeding:
- Do I understand why this component or system is installed?
- Does the owning trade know that I am disturbing this component/system?
- Is this system de-energized, depressurized and drained?
Typically, temporary systems and components are tagged for identification, but some may not be tagged at all depending on the nature of the temporary system. Whether the temporary system has a tag or not, unless you can answer the three questions above, you should not operate, modify or remove the component. Some examples of these types of tags include STO Temporary System Tag (Orange), STO Test Control Tag (Yellow) and NTO Nuclear Support Identity Tag (Blue). Each tag provides a point of contact for the owner of the service. If a tag is not present, contact the cognizant area supervisor for assistance.
We build the most complex machines the world has ever seen. We must respect our temporary systems as much as our ships’ permanently installed systems. When we are operating or handling systems or components, we need to be vigilant, perform our JHA, and ask ourselves the ‘Three Questions.’
We are just one week away from the 2026 AHA Eastern Connecticut Heart Walk on October 3, 2026, at UConn Avery Point and this is our moment to finish strong. We’ve built incredible momentum, and now we’re within striking distance of something big. Right now, Electric Boat is holding second place, behind Mohegan Sun by...Continue reading→
PCU Arizona’s (SSGN 803) Section 2B/5 was successfully delivered to Groton from Quonset Point. At 184 feet in length, this section – which includes the Virginia Payload Module (VPM) – is the largest Virginia-class shipment ever transported. Arizona, the first submarine to incorporate VPM, will be about 460 feet long upon final construction. Section 2B/5...Continue reading→
On September 11, 2001, the Twin Towers of downtown Manhattan’s World Trade Center and the Pentagon in Washington, D.C., were targeted in a series of coordinated attacks that would leave an everlasting imprint on our country’s psyche. As the events unfolded on that Tuesday morning, nearly 3,000 people lost their lives, over 600 were injured...Continue reading→
This year, the Electric Boat Employees’ Community Services Association (EBECSA) proudly celebrates its 75th anniversary. EBECSA was founded in 1951 by EB employees who wanted to create a dedicated, organized way to support nonprofit health and human service agencies in the communities where we live and work. What began as a small employee‑driven effort has...Continue reading→
Employees who have worked on Atlas, EB’s new state-of-the-art floating dry dock, gathered in the South Yard on Wednesday, Aug. 26, to unveil a new bronze plaque recognizing the contributions of its plank owners. The event celebrated the teams who helped bring Atlas from Bollinger Shipyards in Louisiana to its arrival in Groton earlier this year. Atlas will play...Continue reading→
Nearly twenty neighbors of Electric Boat’s Groton shipyard joined company leaders Aug. 25 for a community conversation focused on their quality‑of‑life concerns related to the South Yard Assembly Building (SYAB) and Atlas, the new floating dry dock. The Mayor of the City of Groton, Jill Rusk, also attended. Residents said they appreciated the chance to talk...Continue reading→
EB President Mark Rayha reports from the groundbreaking of the new Waterford Campus, where innovation, engineering and workforce development will come together to support our mission. The new facility will help train hundreds of shipbuilders daily as EB continues to grow for future production demands.
Electric Boat officially broke ground Friday on the Waterford Campus, launching the transformation of the former Crystal Mall into a center for innovation, engineering and high‑tech workforce development. EB President Mark Rayha underscored how the project will reshape the way the company designs, tests and builds submarines. Innovation is the key, he said. “There’s an opportunity to...Continue reading→
Thank you to our incredible EB Heart Walk teams, our community partners, and everyone who joined the American Heart Association (AHA) Torch Journey photoshoot. Your enthusiasm and dedication made this milestone truly special. Now let’s keep our HeartStrong 50 energy going—our goal is 50 teams and $50,000 raised for the 2026 AHA Eastern Connecticut Heart Walk on October 3 at UConn Avery...Continue reading→
The City of Groton Police Department announced that automated speed enforcement cameras will be installed at several locations throughout the city. The cameras will be installed after the required 30-day public notification period, which began on Aug. 7, 2026. Camera locations: Mitchell Street Thames Street Clarence B. Sharp Highway (Route 349) Police said the purpose...Continue reading→